Sign In | Join Free | My himfr.com
Home > Presence Detectors Sensor >

IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor

Shenzhen Merrytek Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor from wholesalers
     
    Buy cheap IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor from wholesalers
    • Buy cheap IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor from wholesalers
    • Buy cheap IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor from wholesalers
    • Buy cheap IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor from wholesalers
    • Buy cheap IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor from wholesalers

    IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor

    Ask Lasest Price
    Brand Name : Merrytek
    Model Number : MSA001S 1
    Certification : CE, RED, SAA
    Price : Negotiation
    Payment Terms : T/T
    Supply Ability : 10,000pcs per month
    Delivery Time : 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
    • Product Details
    • Company Profile

    IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor

    IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor


    1. Features


    1) Low impedance sensor antenna patent helps anti-interference of kinds of wireless signals like 5G, Wi-Fi, Bluetooth, etc.

    2) Parameters can be set by the DIP switch.

    3) Compact size for Independent flush mounting.

    4) Switching power supply design, complies with ERP directive.


    2. Parameters


    InputOperating Voltage Range198-264V AC 50Hz/60Hz
    Rated Voltage220-240V AC 50Hz/60Hz
    Stand-by Power≤0.5W
    Surge TestL--N: 1kV
    OutputWorking ModeON/OFF function
    Type of LoadInductive or Resistive Load
    Load Capacity800W (Resistive), 400w(Inductive)
    Max. Surge Capacity

    15A relay

    30A (50% Ipeak, twidth = 500uS@230Vac full load, cold start);

    Sensor ParametersOperating Frequency5.8 GHz ±75 MHz,ISM Band.
    Transmitting Power0.5mW Max.
    Hold Time5S/1Min/5Min/10Min
    Detection Area100%/75%/50%/25%
    Daylight Sensor5lux/30lux/50lux/Disable (diffuse state)
    Detecting Area (radius)≥3m
    Mounting Height2.5-4m
    Detecting Angle120°

    Operating

    Environment

    Operating Temperature-25℃…+50℃
    Storage Temperature

    Temperature: -40℃…+80℃;

    Humidity: 10%-95% (non-condensing)

    Certificate StandardsSafety StandardsEN60669-1 EN60669-2-1
    EMC StandardsEN300440 EN301489-1 EN55015 EN61547 EN62479
    Environmental RequirementCompliant to RoHS
    CertificateCE, RED, SAA
    OthersWiringscrew type terminals, wire diameter: 0.75-1.5mm2
    IP RatingIP20
    Protection ClassClass II
    InstallationFlush-mounted
    Cut sizeΦ55mm-Φ60m
    PackageWhite box+ White box tags+ Clapboard+ Carton(K=A)
    Lifetime5 years warranty @Ta 230V full load

    Note:

    The detection range of the sensor is related to the moving speed and size of moving object, mounting height, installation height and angle, installation site, reflectors around the sensor etc. The data in the document is typical value and tested by a 165cm person in an open indoor area.

    The detection range at wall mounting will be longer at ceiling mounting. Please reduce detection sensitivity at wall mounting or contact us to confirm the sensor data settings.


    3. Dimension

    4. Wiring Diagram


    5. Start Process & Initialization


    When powered on, the light will turn on for 10 seconds. The sensor does not detect moving signals during initialization.


    6. Factory Settings


    Detection Area: 100% Hold Time: 5s Daylight Sensor: Disable


    7. Installation Instruction



    8. Application Notice


    1. The product should be installed by a professional electrician. Please turn off the power before installing, wiring, or changing the setting of the DIP switch.

    2. The product has good penetration ability to plastic and wooden objects, but there should be no metal accessories or metal shells, glass shells, etc. In front of and near the antenna of the microwave module, otherwise, it will affect the transmission and reception of the microwave antenna.

    3. The product is only suitable for indoor installation. During semi-outdoor or outdoor installation, wind and rain may be regarded as mobile signals to trigger the sensor.

    4. The detection distance is related to the moving speed of the moving object, the size of the moving object, the installation height, the installation angle, whether the installation environment is empty, the material of the reflector, and other factors. The detection distances given in the specification are typical values, which are obtained by testers at a height of 165cm and weight of 65kg and tested in an indoor open environment. The detection area of the wall installation will be greatly increased compared with ceiling installation. If wall installation is used, please reduce the sensitivity or contact us to confirm the use setting.

    5. Avoid long-term vibrating equipment or moving objects around the sensor, and the vibration signal will be regarded as a moving signal to trigger the sensor.

    6. If a pet passes by in the detection area, the sensor may be triggered.

    7. The daylight thresholds are measured on a sunny day without shadow and in an ambient light diffuse reflection status. Different environments and climates cause different brightness values that daylight sensors measure.

    8. The installation distance between the product and the router is recommended to be greater than 2m, and the installation distance between the product and the router is recommended to be greater than 2m.

    9. The installation plane of the product(for example: aluminum substrate, PCB board)needs to be different from the antenna plane of the microwave module by a certain height. The antenna plane of the microwave module should be higher than the nearby plane by more than 5mm to achieve the best detection effect.


    9. DIP Settings


    Detection Area


    12
    100%ONON
    75%-ON
    50%ON-
    25%--

    Hold Time


    34
    ONON5S
    -ON1 Min
    ON-5 Min
    --10 Min

    Daylight Sensor


    56
    ONON5Lux
    ON-30Lux
    III-ON50Lux
    --Disable

    *When set to “disable”, the lamp will switch on when it detects the motion no matter the ambient light level.


    10. Remote Control


    Quality IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shenzhen Merrytek Technology Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)